Arquivos e tutorial para Server v6 - English

[Uncegilla]

Tutorial DK V6 SERVER

Dando uma volta pela net achei isso aki galera, se estiver postando errado me desculpem!

Espero ter ajudado.



SERVER SETUP

First: Download VMWare the latest 7.1.3 one and install it
(Torrent link Below)
http://thepiratebay.org/torrent/6067...als_(scuba-doo)
Second: Do not edit anything in VMWare let it stay default !
(Servers do not need much ram or processing power)
Third: Download the Server file DARKEDEN.EXE and rename it to DARKEDEN.EGG
(Torrent link Below)
http://thepiratebay.org/torrent/6098839

Fourth: Install ALZIP to extract the server files and open it with VMWare
(Download link Below)
http://download.cnet.com/ALZip/3000-...?tag=listprodb
Fifth: It will ask you for login and pw which are login:root pw:`1234 (`1234 not '1234)
Sixth: type mysql -u root then type flush privileges then type quit;

Seventh: Now type ifconfig so you can see your IP address it will be as following 192.168.1.X
Eigth: Download Navicat and install it
(Torrent link Below)
http://thepiratebay.org/torrent/5627...maker-CORE.rar
(unzip and then unrar all files in same folder)

Ninth: In navicat go File->new connection-> Mysql

Ten: In connection name fill in what you want , Host name/ip adress fill in your IP adress which you found in step Seven, Port stays 3306, Username: alcls Pass: alcls1

Eleventh: Click connect , if succesful you will enter the DB
Twelvth: Go to GameServerInfo and change the existing ip's to your IP which you found in step seven. Then go to WorldDBInfo and change the IP's &PORT (3306) also and change Username to alcls and pass to alcls1

Now save and close navicat and go back to VMWare , type ./start and your server should be running with INFINITE LOOP message


CLIENT SETUP

To connect to the server with a client , download the DKPerfect client and start notepad.exe

Put this in notepad:

dklegend.exe NEWSTART Futec(192.168.x.x:9909)

The 192.168.x.x is your IP adress and the 9909 is the default port to connect to the server
Now save it as a .bat file and put it in the dkperfect folder
Click on the file you created and the client should start.

To change the resolution of the client, just go Data>Info>Resolution.inf and edit the X and Y sizes to your monitor size.
Change the 0 to a 1 to activate full screen mode.


THX guys from LeetNetwork !!!!

[Athos]

movido para a área correta, obrigado pela contribuição Uncegilla.

abraço

[Amaterazu]

Valeu parceiro , tava precisando .

[CCV_ThanatuS]

vlwz isso vai ajudar muita gente aki no forum o/

[Lowthyme]

tutorial dk v6 server

dando uma volta pela net achei isso aki galera, se estiver postando errado me desculpem!

espero ter ajudado.



server setup

first: Download vmware the latest 7.1.3 one and install it
(torrent link below)
http://thepiratebay.org/torrent/6067...als_(scuba-doo)
second: Do not edit anything in vmware let it stay default !
(servers do not need much ram or processing power)
third: Download the server file darkeden.exe and rename it to darkeden.egg
(torrent link below)
http://thepiratebay.org/torrent/6098839

fourth: Install alzip to extract the server files and open it with vmware
(download link below)
http://download.cnet.com/alzip/3000-...?tag=listprodb
fifth: It will ask you for login and pw which are login:root pw:`1234 (`1234 not '1234)
sixth: Type mysql -u root then type flush privileges then type quit;

seventh: Now type ifconfig so you can see your ip address it will be as following 192.168.1.x
eigth: Download navicat and install it
(torrent link below)
http://thepiratebay.org/torrent/5627...maker-core.rar
(unzip and then unrar all files in same folder)

ninth: In navicat go file->new connection-> mysql

ten: In connection name fill in what you want , host name/ip adress fill in your ip adress which you found in step seven, port stays 3306, username: Alcls pass: Alcls1

eleventh: Click connect , if succesful you will enter the db
twelvth: Go to gameserverinfo and change the existing ip's to your ip which you found in step seven. Then go to worlddbinfo and change the ip's &port (3306) also and change username to alcls and pass to alcls1

now save and close navicat and go back to vmware , type ./start and your server should be running with infinite loop message


client setup

to connect to the server with a client , download the dkperfect client and start notepad.exe

put this in notepad:

Dklegend.exe newstart futec(192.168.x.x:9909)

the 192.168.x.x is your ip adress and the 9909 is the default port to connect to the server
now save it as a .bat file and put it in the dkperfect folder
click on the file you created and the client should start.

To change the resolution of the client, just go data>info>resolution.inf and edit the x and y sizes to your monitor size.
Change the 0 to a 1 to activate full screen mode.


Thx guys from leetnetwork !!!!

kkk (nenhum dos links funfam mais).................vcs tao perdendo tempo em investir nos gringos (leetnetwork ........forum do cold = nao gosta de br)

[CCV_ThanatuS]

ue quem gosta tem que acreditar neh senao nunca vai conseguir nd

[CCV_Tarok]

O link aqui abriu normal.

[CCV_Love]

links tao normais aki tbm sei nem pra q posey vai postar coisa q num tem nada aver com o tutorial -.- si num fosse esse tuto eu nem saberia sobre a senha das files q um amigo tinha eu tentava '1234 mas num ia =P

[Lowthyme]

Mal, mesmo me precipitei , os links abrirao agora, ( acho ke tem algo haver com novo antivirus que instalei ....AVG..2011, ele tem uma option que blokeias alguns links .. ja arrumei e o links abrirao)!!

boa vai ajudar muita gente que esta na batalha de criar um server v.6!!

OBS... SOMENTE DOIS LINKS NAO ABREM MESMO... ERRO FOUND 404

http://download.cnet.com/ALZip/3000-...?tag=listprodb


http://thepiratebay.org/torrent/5627...maker-CORE.rar


continua post................

[CCV_Love]

o outro eh do vmware e essas files ai ja tao configuradas pra rodar.